Peco Pro 2B+ Blower Assist Catcher Kit
- Fits to many common Scag and Bobcat mowers
- Blower mounted to the rear for more power and easy use
- Modular design - tool-less removal!
Superior catching performance over other similar systems - collect grass quickly and efficiently with minimal blocking and easy maintenance! Designed for our range of Bobcat and Scag zero turn mowers.
Pickup in store
Need more info or want to know if this model is best for you?
Get in touch with the team at OMC
The Peco Pro 2B+ catcher system is a true industry game changer.
Made in the USA and especially designed to fit our Bobcat and Scag range of zero turn mowers, the Pro 2B+ Catcher is an excellent add on to turn your zero turn mower into a dedicated catching mower.
There are many great things about this system over standard catcher systems - but here are our top 3:
One: The blower is situated halfway between deck exit and bags - this maximises the airflow created by the deck, and gives the grass a final push into the bag where it is most prone to blocking on standard units.
Two: Super easy no-tool removal once fitted - should you wish to switch to side discharge for a while - it is extremely simple to remove the boot and chute, unlike on traditional units where the whole blower assembly has to be removed from the deck.
Three: Blower runs off engine rather than deck - This provides maximum power while letting the deck do what it does best, cutting the grass and throwing it out. On traditional units, when you hit some long grass, the deck blades slow down which would cause the blower to slow and ultimately cause blockages.
Other great benefits:
- Works substantially better than systems with no blower unit, which block very easily in New Zealand
- Heavy duty 3-blade steel impellor breaks materials down and creates great airflow
- 7.5 bushel (250L) capacity over two bags
- Bags are simple and easy to remove for dumping of grass
- Robust design
- Made in the USA
This system is ideal for the Bobcat and Scag range of mowers so contact us today for a closer look!
Please note: fitting is free of charge when you buy with a new Bobcat or Scag mower from OMC. We do not carry fit kits for other brands of zero turn mowers. Retro-fitting to existing or older Bobcat or Scag mowers may be possible, a small fee will be charged for fitting and customising to your mower.
Very easy to empty with a flip up lid allowing access to the two catcher bags. Total capacity of 7.2 bushels (250 litres) of grass.
The blower is mounted to the rear of the mower. This means it is at the 'pinch point' where blockages would normally occur on other catcher systems. The blower is powered from the engine rather than the deck - for more power and easy access or switching to side discharge.
Blower contains a 3-blade, fully fabricated steel impellor for airflow and to break down material as it passes through.
|Capacity||9 cu/ft / 7.2 bushel / 253 litres|
|Install weight||80-100 kg (including counterweights)|
|Additional deck width||30-38 cm|
This is simple, smart and very easy to use. It gives a finish comparable to much more expensive mowers, yet is still extremely robust and efficient.
Check out some action footage of the Peco Pro2B+ catcher system in action on a property near Ashburton. In this case, the catcher is fitted to a Bobcat ZT2000 48" zero turn mower.